Parametric Screening • Verified Copper, Steel & Stainless Steel
Parametric Material Selector
Screen the first available source row for each property. Results may use typical or estimated values and are not design allowables. Inspect the displayed conditions and full record; unreported values cannot satisfy a filter.
105 Screening CandidatesFiltered by parametric engineering constraints
| Designation • Canonical Grade | Subfamily | Conductivity | Thermal Cond. | Yield Strength & Context | Tensile (UTS) | Status | Actions |
|---|---|---|---|---|---|---|---|
| C11000 ETP CopperElectrolytic Tough Pitch | Pure Copper | 101 % IACSTYPICAL · 20 °C · CDA Physical Properties section: Measured at 68°F (20°C), volume and weight basis | 391.15 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties section: Measured at 68°F (20°C). Raw: Btu/sq ft/ft hr/°F | 206.8 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.025 in · 20 °C · Section Size: 0.025 in; Yield strength at 0.5% extension under load | 289.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 in · 20 °C · Section Size: 0.04 in | VERIFIED | |
| C10100 Oxygen-Free Electronic (OFE) CopperOxygen-Free Electronic | Pure Copper | 101 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 101.0 % IACS at 68°F (20°C) | 391.15 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 226.0 Btu/(ft·hr·°F) (391.15 W/(m·K) at 20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 289.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C10200 Oxygen-Free (OF) CopperOxygen-Free | Pure Copper | 101 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 101.0 % IACS at 68°F (20°C) | 391.15 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 226.0 Btu/(ft·hr·°F) (391.15 W/(m·K) at 20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 289.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C10300 Oxygen-Free Extra Low Phosphorus (OFXLP) CopperOxygen-Free Extra Low Phosphorus | Deoxidized Copper | 99 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 99.0 % IACS at 68°F (20°C) | 385.95 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 223.0 Btu/(ft·hr·°F) (385.95 W/(m·K) at 20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 289.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C12000 DLP CopperPhosphorus-Deoxidized Low Residual Phosphorus | Deoxidized Copper | 98 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 98.0 % IACS at 68°F (20°C) | 385.95 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 223.0 Btu/(ft·hr·°F) (385.95 W/(m·K) at 20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 289.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C12200 DHP CopperPhosphorus-Deoxidized High Residual Phosphorus | Deoxidized Copper | 85 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 85.0 % IACS at 68°F (20°C) | 339.22 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 196.0 Btu/(ft·hr·°F) (339.22 W/(m·K) at 20°C) | 206.8 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.25 · 20 °C · Section Size: 0.25; Section Size: 0.25 in; Yield strength at 0.5% extension under load | 289.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C14500 Tellurium CopperTellurium Copper | Free-Machining Copper | 93 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 93.0 % IACS at 68°F (20°C) | 354.8 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 205.0 Btu/(ft·hr·°F) (354.8 W/(m·K) at 20°C) | 275.8 MPaTYPICAL · 1/2 Hard (H02) · Rod · 1 · 20 °C · Section Size: 1; Cold Work: 20%; Section Size: 1 in; Yield strength at 0.5% extension under load | 262 MPaTYPICAL · 1/2 Hard (H02) · Rod · 0.25 · 20 °C · Section Size: 0.25; Cold Work: 20%; Section Size: 0.25 in | VERIFIED | |
| C14700 Sulfur CopperSulfur Copper | Free-Machining Copper | 95 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 95.0 % IACS at 68°F (20°C) | 373.84 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 216.0 Btu/(ft·hr·°F) (373.84 W/(m·K) at 20°C) | 268.9 MPaTYPICAL · 1/2 Hard (H02) · Rod · 2 · 20 °C · Section Size: 2; Section Size: 2 in; Yield strength at 0.5% extension under load | 289.6 MPaTYPICAL · 1/2 Hard (H02) · Rod · 2 · 20 °C · Section Size: 2; Section Size: 2 in | VERIFIED | |
| C17200 Beryllium Copper (Alloy 25)Alloy 25 | Beryllium Copper | 22 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 22.0 % IACS at 68°F (20°C) | 107.31 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 62.0 Btu/(ft·hr·°F) (107.31 W/(m·K) at 20°C) | 1206.6 MPaTYPICAL · 1/2 Hard and Precipitation Heat Treated (TH02) · Flat Products · 0.188 · 20 °C · Section Size: 0.188; Section Size: 0.188 in; Yield strength at 0.5% extension under load | 1344.5 MPaTYPICAL · 1/2 Hard and Precipitation Heat Treated (TH02) · Flat Products · 0.188 · 20 °C · Section Size: 0.188; Section Size: 0.188 in | VERIFIED | |
| C17500 Beryllium Copper (Alloy 10)Alloy 10 | Beryllium Copper | 45 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 45.0 % IACS at 68°F (20°C) | 207.69 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 120.0 Btu/(ft·hr·°F) (207.69 W/(m·K) at 20°C) | 655 MPaTYPICAL · Hard and Precipitation Heat Treated (TH04) · Flat Products · 20 °C · Yield strength at 0.5% extension under load | 758.4 MPaTYPICAL · Hard and Precipitation Heat Treated (TH04) · Flat Products · 20 °C | VERIFIED | |
| C17510 Beryllium Copper (Alloy 3)Alloy 3 | Beryllium Copper | 48 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 48.0 % IACS at 68°F (20°C) | 207.69 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 120.0 Btu/(ft·hr·°F) (207.69 W/(m·K) at 20°C) | 744.6 MPaTYPICAL · 1/2 Hard and Precipitation Heat Treated (TH02) · Flat Products · 20 °C · Yield strength at 0.5% extension under load | 792.9 MPaTYPICAL · 1/2 Hard and Precipitation Heat Treated (TH02) · Flat Products · 20 °C | VERIFIED | |
| C19400 High-Strength Modified Copper (HSM Copper)HSM Copper | High-Performance Copper Alloys | 65 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 65.0 % IACS at 68°F (20°C) | 259.61 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 150.0 Btu/(ft·hr·°F) (259.61 W/(m·K) at 20°C) | 365.4 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 413.7 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C26000 Cartridge Brass 70/30Cartridge Brass 70/30 | Cartridge Brass | 28 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 28.0 % IACS at 68°F (20°C) | 121.15 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 70.0 Btu/(ft·hr·°F) (121.15 W/(m·K) at 20°C) | 275.8 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 427.5 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C26800 Yellow Brass 66%Yellow Brass 66% | Yellow Brass | 27 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 27.0 % IACS at 68°F (20°C) | 115.96 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 67.0 Btu/(ft·hr·°F) (115.96 W/(m·K) at 20°C) | 344.7 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 420.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C27000 Yellow Brass 65%Yellow Brass 65% | Yellow Brass | 27 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 27.0 % IACS at 68°F (20°C) | 115.96 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 67.0 Btu/(ft·hr·°F) (115.96 W/(m·K) at 20°C) | 344.7 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 420.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C27200 Yellow Brass 63%Yellow Brass 63% | Yellow Brass | 27.6 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 27.6 % IACS at 68°F (20°C) | 115.96 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 67.0 Btu/(ft·hr·°F) (115.96 W/(m·K) at 20°C) | 379.2 MPaTYPICAL · Hard Drawn (H80) · Tube · 0.065 · 20 °C · Section Size: 0.065; Section Size: 0.065 in; Yield strength at 0.5% extension under load | 510.2 MPaTYPICAL · Hard Drawn (H80) · Tube · 0.065 · 20 °C · Section Size: 0.065; Section Size: 0.065 in | VERIFIED | |
| C28000 Muntz Metal 60/40Muntz Metal | Yellow Brass | 28 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 28.0 % IACS at 68°F (20°C) | 122.88 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 71.0 Btu/(ft·hr·°F) (122.88 W/(m·K) at 20°C) | 344.7 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 482.6 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C36000 Free-Cutting BrassFree-Cutting Brass | Free-Machining Brass | 26 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 26.0 % IACS at 68°F (20°C) | 115.96 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 67.0 Btu/(ft·hr·°F) (115.96 W/(m·K) at 20°C) | 117.2 MPaTYPICAL · 1/2 Hard (H02) · Bar · 1.5 · 20 °C · Section Size: 1.5; Section Size: 1.5 in; Yield strength at 0.5% extension under load | 310.3 MPaTYPICAL · 1/2 Hard (H02) · Bar · 1.5 · 20 °C · Section Size: 1.5; Section Size: 1.5 in | VERIFIED | |
| C46400 Naval BrassNaval Brass | Naval Brass | 26 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 26.0 % IACS at 68°F (20°C) | 115.96 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 67.0 Btu/(ft·hr·°F) (115.96 W/(m·K) at 20°C) | 172.4 MPaTYPICAL · As Hot Rolled (M20) · Flat Products · 1 · 20 °C · Section Size: 1; Section Size: 1 in; Yield strength at 0.5% extension under load | 482.6 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C51000 Phosphor Bronze 5% APhosphor Bronze 5% Grade A | Phosphor Bronze | 15 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 15.0 % IACS at 68°F (20°C) | 69.23 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 40.0 Btu/(ft·hr·°F) (69.23 W/(m·K) at 20°C) | 372.3 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 20 °C · Yield strength at 0.5% extension under load | 455.1 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 20 °C | VERIFIED | |
| C52100 Phosphor Bronze 8% CPhosphor Bronze 8% Grade C | Phosphor Bronze | 13 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 13.0 % IACS at 68°F (20°C) | 62.31 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 36.0 Btu/(ft·hr·°F) (62.31 W/(m·K) at 20°C) | 441.3 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 530.9 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C54400 Free-Machining Phosphor Bronze (B-2)Phosphor Bronze B-2 | Phosphor Bronze | 19 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 19.0 % IACS at 68°F (20°C) | 86.54 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 50.0 Btu/(ft·hr·°F) (86.54 W/(m·K) at 20°C) | 275.8 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 399.9 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C61400 Aluminum Bronze DAluminum Bronze D | Aluminum Bronze | 14 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 14.0 % IACS at 68°F (20°C) | 67.5 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 39.0 Btu/(ft·hr·°F) (67.5 W/(m·K) at 20°C) | 413.7 MPaTYPICAL · Hard (H04) · Flat Products · 0.125 · 20 °C · Section Size: 0.125; Section Size: 0.125 in; Yield strength at 0.5% extension under load | 613.6 MPaTYPICAL · Hard (H04) · Flat Products · 0.125 · 20 °C · Section Size: 0.125; Section Size: 0.125 in | VERIFIED | |
| C63000 Nickel-Aluminum Bronze (AMS 4640)Nickel-Aluminum Bronze | Aluminum Bronze | 7 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 7.0 % IACS at 68°F (20°C) | 39.11 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 22.6 Btu/(ft·hr·°F) (39.11 W/(m·K) at 20°C) | 344.7 MPaTYPICAL · As Hot Extruded (M30) · Bar · 3 · 20 °C · Section Size: 3; Section Size: 3 in; Yield strength at 0.5% extension under load | 620.5 MPaTYPICAL · As Hot Extruded (M30) · Bar · 3 · 20 °C · Section Size: 3; Section Size: 3 in | VERIFIED | |
| C63200 Nickel-Aluminum Bronze (Naval Alloy)Naval Nickel-Aluminum Bronze | Aluminum Bronze | 7 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 7.0 % IACS at 68°F (20°C) | 34.61 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 20.0 Btu/(ft·hr·°F) (34.61 W/(m·K) at 20°C) | 310.3 MPaTYPICAL · Light Anneal (O50) · Forgings · 5 · 20 °C · Section Size: 5; Section Size: 5 in; Yield strength at 0.5% extension under load | 689.5 MPaTYPICAL · Light Anneal (O50) · Forgings · 5 · 20 °C · Section Size: 5; Section Size: 5 in | VERIFIED | |
| C65500 High-Silicon Bronze AHigh-Silicon Bronze A | Silicon Bronze | 7 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 7.0 % IACS at 68°F (20°C) | 36.35 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 21.0 Btu/(ft·hr·°F) (36.35 W/(m·K) at 20°C) | 241.3 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 537.8 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in | VERIFIED | |
| C70600 Copper-Nickel 90/10Copper-Nickel 90/10 | Copper-Nickel (Cupronickel) | 9 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 9.0 % IACS at 68°F (20°C) | 45 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 26.0 Btu/(ft·hr·°F) (45.0 W/(m·K) at 20°C) | 172.4 MPaTYPICAL · Hard (H04) · Bar · 20 °C · Yield strength at 0.5% extension under load | 344.7 MPaTYPICAL · Hard (H04) · Bar · 20 °C | VERIFIED | |
| C71500 Copper-Nickel 70/30Copper-Nickel 70/30 | Copper-Nickel (Cupronickel) | 4.6 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 4.6 % IACS at 68°F (20°C) | 29.42 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 17.0 Btu/(ft·hr·°F) (29.42 W/(m·K) at 20°C) | — | 379.2 MPaTYPICAL · As Hot Rolled (M20) · Flat Products · 1 · 20 °C · Section Size: 1; Section Size: 1 in | VERIFIED | |
| C93200 Bearing Bronze (SAE 660)SAE 660 | Bearing Bronze | 12 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 12.0 % IACS at 68°F (20°C) | 58.15 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 33.6 Btu/(ft·hr·°F) (58.15 W/(m·K) at 20°C) | 96.5 MPaTYPICAL · As Centrifugal Cast (M02) · As Centrifugal Cast · 20 °C · Yield strength at 0.5% extension under load | 206.8 MPaTYPICAL · As Centrifugal Cast (M02) · As Centrifugal Cast · 20 °C | VERIFIED | |
| C95400 Aluminum Bronze 9CAluminum Bronze 9C | Aluminum Bronze | 13 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 13.0 % IACS at 68°F (20°C) | 58.67 W/(m·K)TYPICAL · 20 °C · CDA Physical Properties: Thermal conductivity 33.9 Btu/(ft·hr·°F) (58.67 W/(m·K) at 20°C) | 206.8 MPaTYPICAL · As Centrifugal Cast (M02) · As Centrifugal Cast · 20 °C · Yield strength at 0.5% extension under load | 517.1 MPaTYPICAL · As Centrifugal Cast (M02) · As Centrifugal Cast · 20 °C | VERIFIED | |
| 17-4 PH (630) Stainless Steel | Precipitation Hardening | — | 17.9 W/(m·K)TYPICAL · H900 · 149 °C | 1275.5 MPaTYPICAL · H900 · Bar · LONGITUDINAL · Typical longitudinal bar properties; section dimensions and test temperature not stated in this table. Not minimum requirements. | 1379 MPaTYPICAL · H900 · Bar · LONGITUDINAL · Typical longitudinal bar properties; section dimensions and test temperature not stated in this table. Not minimum requirements. | VERIFIED | |
| 409 Stainless Steel | Ferritic | — | 25.8 W/(m·K)TYPICAL · 100 °C | ≥ 170 MPaMINIMUM · Annealed · Sheet and Strip | ≥ 380 MPaMINIMUM · Annealed · Sheet and Strip | VERIFIED | |
| SAE 1008 Carbon Steel | Carbon Steel | — | 51.9 W/(m·K)TYPICAL · 100 °C | ≥ 168.9 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 303.4 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1010 Carbon Steel | Carbon Steel | — | 51.9 W/(m·K)TYPICAL · 100 °C | ≥ 179.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 324.1 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1018 Carbon Steel | Carbon Steel | — | 51.9 W/(m·K)TYPICAL · 100 °C | ≥ 220.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 399.9 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1020 Carbon Steel | Carbon Steel | — | 51.9 W/(m·K)TYPICAL · 100 °C | ≥ 206.8 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 379.2 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1025 Carbon Steel | Carbon Steel | — | 51.5 W/(m·K)TYPICAL · 100 °C | ≥ 220.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 399.9 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1030 Carbon Steel | Carbon Steel | — | 51 W/(m·K)TYPICAL · 100 °C | ≥ 258.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 468.8 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1035 Carbon Steel | Carbon Steel | — | 50.7 W/(m·K)TYPICAL · 100 °C | ≥ 272.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 496.4 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1040 Carbon Steel | Carbon Steel | — | 50 W/(m·K)TYPICAL · 100 °C | ≥ 289.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 524 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1045 Carbon Steel | Carbon Steel | — | 49.8 W/(m·K)TYPICAL · 100 °C | ≥ 310.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 565.4 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1050 Carbon Steel | Carbon Steel | — | 49 W/(m·K)TYPICAL · 100 °C | ≥ 341.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 620.5 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1060 Carbon Steel | Carbon Steel | — | 48.5 W/(m·K)TYPICAL · 100 °C | ≥ 372.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 675.7 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1070 Carbon Steel | Carbon Steel | — | 48 W/(m·K)TYPICAL · 100 °C | ≥ 386.1 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 703.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1080 Carbon Steel | Carbon Steel | — | 48 W/(m·K)TYPICAL · 100 °C | ≥ 424 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | ≥ 772.2 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | VERIFIED | |
| SAE 1095 Carbon Steel | Carbon Steel | — | 48 W/(m·K)TYPICAL · 100 °C | ≥ 380 MPaMINIMUM · Spheroidize Annealed Bar · Bar | ≥ 655 MPaMINIMUM · Spheroidize Annealed Bar · Bar | VERIFIED | |
| SAE 4130 Alloy Steel | Alloy Steel | — | 42.7 W/(m·K)TYPICAL · 100 °C | ≥ 435 MPaMINIMUM · Normalized Bar · Bar | ≥ 670 MPaMINIMUM · Normalized Bar · Bar | VERIFIED | |
| SAE 4140 Alloy Steel | Alloy Steel | — | 42.6 W/(m·K)TYPICAL · 100 °C | ≥ 740 MPaMINIMUM · Quenched and tempered (voestalpine supply) · Bar · 10–100 mm · voestalpine supply properties for the stated section range; source does not specify test temperature. Not extrapolated to other products or heat treatments. | 930–1080 MPaRANGE · Quenched and tempered (voestalpine supply) · Bar · 10–100 mm · voestalpine supply properties for the stated section range; source does not specify test temperature. Not extrapolated to other products or heat treatments. | VERIFIED | |
| SAE 4142 Alloy Steel | Alloy Steel | — | 42.6 W/(m·K)TYPICAL · 100 °C | ≥ 640 MPaMINIMUM · Normalized Bar · Bar | ≥ 980 MPaMINIMUM · Normalized Bar · Bar | VERIFIED | |
| SAE 4150 Alloy Steel | Alloy Steel | — | 42.6 W/(m·K)TYPICAL · 100 °C | ≥ 430 MPaMINIMUM · Annealed Bar · Bar | ≥ 730 MPaMINIMUM · Annealed Bar · Bar | VERIFIED | |
| SAE 4340 Alloy Steel | Alloy Steel | — | 44.5 W/(m·K)TYPICAL · 100 °C | ≥ 470 MPaMINIMUM · Annealed Bar · Bar | ≥ 745 MPaMINIMUM · Annealed Bar · Bar | VERIFIED | |
| SAE 4620 Alloy Steel | Alloy Steel | — | 46.6 W/(m·K)TYPICAL · 100 °C | ≥ 360 MPaMINIMUM · Normalized Bar - Core Properties · Bar | ≥ 600 MPaMINIMUM · Normalized Bar - Core Properties · Bar · Core properties for carburizing grade. | VERIFIED | |
| SAE 5120 Alloy Steel | Alloy Steel | — | 46.6 W/(m·K)TYPICAL · 100 °C | ≥ 340 MPaMINIMUM · Normalized Bar - Core Properties · Bar | ≥ 580 MPaMINIMUM · Normalized Bar - Core Properties · Bar · Core properties for carburizing grade. | VERIFIED | |
| SAE 5140 Alloy Steel | Alloy Steel | — | 46 W/(m·K)TYPICAL · 100 °C | ≥ 410 MPaMINIMUM · Annealed Bar · Bar | ≥ 640 MPaMINIMUM · Annealed Bar · Bar | VERIFIED | |
| SAE 5160 Alloy Steel | Alloy Steel | — | 46 W/(m·K)TYPICAL · 100 °C | ≥ 400 MPaMINIMUM · Annealed Bar · Bar | ≥ 720 MPaMINIMUM · Annealed Bar · Bar | VERIFIED | |
| SAE 6150 Alloy Steel | Alloy Steel | — | 46 W/(m·K)TYPICAL · 100 °C | ≥ 410 MPaMINIMUM · Annealed Bar · Bar | ≥ 670 MPaMINIMUM · Annealed Bar · Bar | VERIFIED | |
| SAE 8620 Alloy Steel | Alloy Steel | — | 46.6 W/(m·K)TYPICAL · 100 °C | ≥ 380 MPaMINIMUM · Normalized Bar (870°C) - Core Properties · Bar · Core mechanical properties. | ≥ 630 MPaMINIMUM · Normalized Bar (870°C) - Core Properties · Bar · Core mechanical properties. Case hardening properties require a specified carburizing and quenching cycle. | VERIFIED | |
| SAE 8630 Alloy Steel | Alloy Steel | — | 46.6 W/(m·K)TYPICAL · 100 °C | ≥ 450 MPaMINIMUM · Normalized Bar · Bar | ≥ 720 MPaMINIMUM · Normalized Bar · Bar | VERIFIED | |
| SAE 8640 Alloy Steel | Alloy Steel | — | 46.6 W/(m·K)TYPICAL · 100 °C | ≥ 415 MPaMINIMUM · Annealed Bar · Bar | ≥ 690 MPaMINIMUM · Annealed Bar · Bar | VERIFIED | |
| SAE 8740 Alloy Steel | Alloy Steel | — | 46.6 W/(m·K)TYPICAL · 100 °C | ≥ 415 MPaMINIMUM · Annealed Bar · Bar | ≥ 690 MPaMINIMUM · Annealed Bar · Bar | VERIFIED | |
| SAE 9310 Alloy Steel | Alloy Steel | — | 46 W/(m·K)TYPICAL · 100 °C | ≥ 585 MPaMINIMUM · Normalized Bar - Core Properties · Bar | ≥ 825 MPaMINIMUM · Normalized Bar - Core Properties · Bar · Core properties for heavy-duty carburizing grade. | VERIFIED | |
| SAE 52100 Alloy Steel | Alloy Steel | — | 46.6 W/(m·K)TYPICAL · 100 °C | ≥ 380 MPaMINIMUM · Spheroidize Annealed Bar · Bar | ≥ 620 MPaMINIMUM · Spheroidize Annealed Bar · Bar | VERIFIED | |
| 201 Stainless Steel | Austenitic | — | 16.2 W/(m·K)TYPICAL · 100 °C | ≥ 310 MPaMINIMUM · Annealed · Sheet and Strip | ≥ 655 MPaMINIMUM · Annealed · Sheet and Strip | VERIFIED | |
| 202 Stainless Steel | Austenitic | — | — | ≥ 310 MPaMINIMUM · Annealed · Sheet and Strip | ≥ 620 MPaMINIMUM · Annealed · Sheet and Strip | VERIFIED | |
| 301 Stainless Steel | Austenitic | — | 16.3 W/(m·K)TYPICAL · 100 °C | ≥ 276 MPaMINIMUM · Annealed · Sheet and Strip | ≥ 758 MPaMINIMUM · Annealed · Sheet and Strip | VERIFIED | |
| 302 Stainless Steel | Austenitic | — | 16.2 W/(m·K)TYPICAL · 100 °C | ≥ 205 MPaMINIMUM · Annealed · Sheet and Strip | ≥ 515 MPaMINIMUM · Annealed · Sheet and Strip | VERIFIED | |
| 303 Stainless Steel | Austenitic | — | 16.2 W/(m·K)TYPICAL · 100 °C | ≥ 205 MPaMINIMUM · Cold Finished Annealed Bar · Bar | ≥ 515 MPaMINIMUM · Cold Finished Annealed Bar · Bar | VERIFIED | |
| 304 Stainless Steel | Austenitic | — | 16.3 W/(m·K)TYPICAL · 100 °C | ≥ 206.8 MPaMINIMUM · ASTM requirements (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. | ≥ 517.1 MPaMINIMUM · ASTM requirements (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. | VERIFIED | |
| 304L Stainless Steel | Austenitic | — | 16.3 W/(m·K)TYPICAL · 100 °C | ≥ 172.4 MPaMINIMUM · ASTM requirements (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. | ≥ 482.6 MPaMINIMUM · ASTM requirements (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. | VERIFIED | |
| 305 Stainless Steel | Austenitic | — | 16.2 W/(m·K)TYPICAL · 100 °C | ≥ 170 MPaMINIMUM · Annealed · Sheet and Strip | ≥ 485 MPaMINIMUM · Annealed · Sheet and Strip | VERIFIED | |
| 309 Stainless Steel | Austenitic | — | 15.6 W/(m·K)TYPICAL · 100 °C | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | ≥ 515 MPaMINIMUM · Annealed · Plate, Sheet and Strip | VERIFIED | |
| 310 Stainless Steel | Austenitic | — | 14.2 W/(m·K)TYPICAL · 100 °C | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | ≥ 515 MPaMINIMUM · Annealed · Plate, Sheet and Strip | VERIFIED | |
| 316 Stainless Steel | Austenitic | — | 14.6 W/(m·K)TYPICAL · 100 °C | ≥ 206.8 MPaMINIMUM · ASTM requirements at room temperature (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. Source specifies room temperature without a numeric temperature. | ≥ 517.1 MPaMINIMUM · ASTM requirements at room temperature (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. Source specifies room temperature without a numeric temperature. | VERIFIED | |
| 316L Stainless Steel | Austenitic | — | 14.6 W/(m·K)TYPICAL · 100 °C | ≥ 172.4 MPaMINIMUM · ASTM requirements at room temperature (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. Source specifies room temperature without a numeric temperature. | ≥ 482.6 MPaMINIMUM · ASTM requirements at room temperature (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. Source specifies room temperature without a numeric temperature. | VERIFIED | |
| 321 Stainless Steel | Austenitic | — | 16.1 W/(m·K)TYPICAL · 100 °C | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | ≥ 515 MPaMINIMUM · Annealed · Plate, Sheet and Strip | VERIFIED | |
| 347 Stainless Steel | Austenitic | — | 16.1 W/(m·K)TYPICAL · 100 °C | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | ≥ 515 MPaMINIMUM · Annealed · Plate, Sheet and Strip | VERIFIED | |
| 410 Stainless Steel | Martensitic | — | 24.9 W/(m·K)TYPICAL · 100 °C | ≥ 205 MPaMINIMUM · Annealed · Bar and Sheet | ≥ 450 MPaMINIMUM · Annealed · Bar and Sheet | VERIFIED | |
| 420 Stainless Steel | Martensitic | — | 24.9 W/(m·K)TYPICAL · 100 °C | ≥ 345 MPaMINIMUM · Annealed · Bar and Strip | ≥ 585 MPaMINIMUM · Annealed · Bar and Strip | VERIFIED | |
| 1050 Aluminum1050A | Wrought Aluminum Alloys | — | 222 W/(m·K)TYPICAL | ≥ 20 MPaMINIMUM · O Temper · Sheet · 0.2mm to 6.0mm | 65–95 MPaRANGE · O Temper · Sheet · 0.2mm to 6.0mm | VERIFIED | |
| 3103 AluminumEN AW-3103 | Wrought Aluminum Alloys | — | 160 W/(m·K)TYPICAL | ≥ 115 MPaMINIMUM · H14 Temper · Sheet · 0.2mm to 6.0mm | 140–180 MPaRANGE · H14 Temper · Sheet · 0.2mm to 6.0mm | VERIFIED | |
| 5005 AluminumEN AW-5005 | Wrought Aluminum Alloys | — | 201 W/(m·K)TYPICAL | ≥ 110 MPaMINIMUM · H34 Temper · Sheet · 0.2mm to 12.5mm | 145–185 MPaRANGE · H34 Temper · Sheet · 0.2mm to 12.5mm | VERIFIED | |
| 5083 AluminumEN AW-5083 | Wrought Aluminum Alloys | — | 121 W/(m·K)TYPICAL | ≥ 125 MPaMINIMUM · O / H111 Temper · Sheet · 0.2mm to 6.3mm | 275–350 MPaRANGE · O / H111 Temper · Sheet · 0.2mm to 6.3mm | VERIFIED | |
| 5251 AluminumEN AW-5251 | Wrought Aluminum Alloys | — | 149 W/(m·K)TYPICAL | ≥ 60 MPaMINIMUM · O Temper · Sheet & Plate · 0.2mm to 50.0mm | 160–200 MPaRANGE · O Temper · Sheet & Plate · 0.2mm to 50.0mm | VERIFIED | |
| 5454 AluminumEN AW-5454 | Wrought Aluminum Alloys | — | 134 W/(m·K)TYPICAL | ≥ 85 MPaMINIMUM · O / H111 Temper · Sheet · 0.2mm to 6.0mm | 215–265 MPaRANGE · O / H111 Temper · Sheet · 0.2mm to 6.0mm | VERIFIED | |
| 5754 AluminumEN AW-5754 | Wrought Aluminum Alloys | — | 147 W/(m·K)TYPICAL | ≥ 80 MPaMINIMUM · H111 Temper · Sheet · 0.2mm to 6.0mm | 190–240 MPaRANGE · H111 Temper · Sheet · 0.2mm to 6.0mm | VERIFIED | |
| 6005A AluminumEN AW-6005A | Wrought Aluminum Alloys | — | 188 W/(m·K)TYPICAL | ≥ 225 MPaMINIMUM · T6 Temper · Extrusions · up to 5mm | ≥ 270 MPaMINIMUM · T6 Temper · Extrusions · up to 5mm | VERIFIED | |
| 6026 AluminumEN AW-6026 | Wrought Aluminum Alloys | — | 138 W/(m·K)TYPICAL | ≥ 360 MPaMINIMUM · T9 Temper · Extruded and Drawn Bar | ≥ 390 MPaMINIMUM · T9 Temper · Extruded and Drawn Bar | VERIFIED | |
| 6060 AluminumEN AW-6060 | Wrought Aluminum Alloys | — | 200 W/(m·K)TYPICAL | ≥ 120 MPaMINIMUM · T5 Temper · Extrusions · Up to 150mm Dia., 15mm WT tube, 5mm WT profiles | ≥ 160 MPaMINIMUM · T5 Temper · Extrusions · Up to 150mm Dia., 15mm WT tube, 5mm WT profiles | VERIFIED | |
| 6082 AluminumEN AW-6082 | Wrought Aluminum Alloys | — | 180 W/(m·K)TYPICAL | ≤ 85 MPaMAXIMUM · O Temper · Sheet · 0.4mm to 6.0mm | ≤ 150 MPaMAXIMUM · O Temper · Sheet · 0.4mm to 6.0mm | VERIFIED | |
| 6101 AluminumEN AW-6101 | Wrought Aluminum Alloys | — | 218 W/(m·K)TYPICAL | ≥ 170 MPaMINIMUM · T6 Temper · Extruded Bar · up to 150mm | ≥ 200 MPaMINIMUM · T6 Temper · Extruded Bar · up to 150mm | VERIFIED | |
| 6106 AluminumEN AW-6106 | Wrought Aluminum Alloys | — | 190 W/(m·K)TYPICAL | ≥ 200 MPaMINIMUM · T6 Temper · Extruded Profiles · up to 10mm WT | ≥ 250 MPaMINIMUM · T6 Temper · Extruded Profiles · up to 10mm WT | VERIFIED | |
| 6262 AluminumEN AW-6262 | Wrought Aluminum Alloys | — | 172 W/(m·K)TYPICAL | ≥ 240 MPaMINIMUM · T6 Temper · Extrusions · up to 200mm Dia | ≥ 260 MPaMINIMUM · T6 Temper · Extrusions · up to 200mm Dia | VERIFIED | |
| 1100 AluminumAA 1100 | Wrought Aluminum Alloys | 59 % IACSTYPICAL · O Temper | 222 W/(m·K)TYPICAL · O Temper | 34 MPaTYPICAL · O Temper · Drawn Tube | 90 MPaTYPICAL · O Temper · Drawn Tube | VERIFIED | |
| 2011 AluminumAA 2011 | Wrought Aluminum Alloys | 39 % IACSTYPICAL · T3 Temper | 151 W/(m·K)TYPICAL · T3 Temper | 296 MPaTYPICAL · T3 Temper · Cold Finished Rod & Bar | 379 MPaTYPICAL · T3 Temper · Cold Finished Rod & Bar | VERIFIED | |
| 2014 AluminumAA 2014 | Wrought Aluminum Alloys | 50 % IACSTYPICAL · O Temper | 192 W/(m·K)TYPICAL · O Temper | 97 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 186 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | VERIFIED | |
| 2017 AluminumAA 2017 | Wrought Aluminum Alloys | 50 % IACSTYPICAL · O Temper | 193 W/(m·K)TYPICAL · O Temper | 70 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 179 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | VERIFIED | |
| 2024 AluminumAA 2024 | Wrought Aluminum Alloys | 50 % IACSTYPICAL · O Temper | 190 W/(m·K)TYPICAL · O Temper | 76 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 186 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | VERIFIED | |
| 3003 AluminumAA 3003 | Wrought Aluminum Alloys | 50 % IACSTYPICAL · O Temper | 193 W/(m·K)TYPICAL · O Temper | 41 MPaTYPICAL · O Temper · Drawn Tube | 110 MPaTYPICAL · O Temper · Drawn Tube | VERIFIED | |
| 5052 AluminumAA 5052 | Wrought Aluminum Alloys | 35 % IACSTYPICAL | 138 W/(m·K)TYPICAL | 90 MPaTYPICAL · O Temper · Drawn Tube | 193 MPaTYPICAL · O Temper · Drawn Tube | VERIFIED | |
| 6061 AluminumAA 6061 | Wrought Aluminum Alloys | 47 % IACSTYPICAL · O Temper | 180 W/(m·K)TYPICAL · O Temper | 55 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 124 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | VERIFIED | |
| 6063 AluminumAA 6063 | Wrought Aluminum Alloys | 58 % IACSTYPICAL · O Temper | 218 W/(m·K)TYPICAL · O Temper | 48 MPaTYPICAL · O Temper · Drawn Tube | 90 MPaTYPICAL · O Temper · Drawn Tube | VERIFIED | |
| 7050 AluminumAA 7050 | Wrought Aluminum Alloys | 39.5 % IACSTYPICAL · T76, T76511 Temper | 154 W/(m·K)TYPICAL · T76, T76511 Temper | 469 MPaTYPICAL · T7451 Temper · Plate · LONGITUDINAL | 524 MPaTYPICAL · T7451 Temper · Plate · LONGITUDINAL | VERIFIED | |
| 7075 AluminumAA 7075 | Wrought Aluminum Alloys | 45 % IACSTYPICAL · O Temper | 173 W/(m·K)TYPICAL · O Temper | 103 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 228 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | VERIFIED | |
| 7175 AluminumAA 7175 | Wrought Aluminum Alloys | 33 % IACSTYPICAL · T66 Temper | 130 W/(m·K)TYPICAL · T66 Temper | 510 MPaTYPICAL · T66 Temper · Forgings | 572 MPaTYPICAL · T66 Temper · Forgings | VERIFIED | |
| 7475 AluminumAA 7475 | Wrought Aluminum Alloys | 36 % IACSTYPICAL · T651 Temper | 142 W/(m·K)TYPICAL · T651 Temper | 510 MPaTYPICAL · T651 Temper · Sheet & Plate | 586 MPaTYPICAL · T651 Temper · Sheet & Plate | VERIFIED |